Assembly Instructions

Step 15
Step 16
• Install pellet hopper
assembly
28
into grill
body.
• Attach pellet hopper
assembly
28
to grill body
using 4 screws. (These
screws are in the bag
with the owner’s manual.)
• Tighten 4 screws.
Note: When assembling
the pellet hopper to the
grill, the light wires should
be fed through the back
side of the pellet hopper
to ensure there is enough
wire to connect during
Step 29b.
10
28
• Remove 2 screws from
ash clean-out plate
23
and set aside for later
use.
• Slide ash clean-out plate
23
into bottom of auger
housing.
23
23
Light Wires