User Manual

INSTALLATION & OPERATION MANUAL 10080 REV 0 (03/21)
PAGE
17
OF20
ELECTRIC COUNTER CONVECTION STEAMER
MAINTENANCE
REMOVAL OF SCALE DEPOSITS (Continued)
1. Drain steam generator by setting the main power switch to OFF. Set cooking timer to “0FF”.
2. Set the main power switch to DELIME.
3. Delime port (A) is located on left side at the rear of the unit. Unscrew plug from elbow to allow CLR solution to be
poured in using a tube and funnel. Pour in 28 ounces of solution into the generator (pour slowly to avoid spillage).
Remove tube and funnel. Screw the plug back into the elbow so that it is sealed.
4. Turn main power switch to ON.
5. Allow steamer to remain in READY cycle for 1-1/2 hours, then turn main power switch OFF and allow generator to
drain.
6. FLUSH CYCLE: Turn main power switch to ON. When READY light comes on, turn main power switch to OFF to drain
generator. Repeat this step three times to completely ush generator.
7. Clean exterior and interior. Use a mild solution of soap and water. Rinse with clean cloth. Dry with soft cloth. Leave
compartment door open when not in use.
The steamer is now ready for use. Turn o󰀨 for overnight shutdown.
WARNING
Disconnect the power supply to the appliance before cleaning or servicing.