Spec Sheet

ManualsBrandsCrown Verity ManualsAccess DoorsIBI48-HD 48" Infinite Series Built-In Horizontal Door with 304 Stainless Steel and Soft-Closing Doors in Stainless Steel

REVISION HISTORY

REV

DESCRIPTION

DATE

APPROVED

TITLE

SIZE

Customer

DWG NO

REV

SCALE SHEET

Depth

3.813

Infinite Series

Horizontal Door 48 Inch

Engineering Release

01/01/2020

Todd Stone

37 Adams Blvd., Brantford, Ontario, N3S 7V8

P: (519) 751-1800 www.crownverity.com

1:7

1 of 1

IBI48-HD

Crown Verity

Width

Height

Suggested Cut-out Dimensions

53.125

12.125

DRAWN BY:

Todd Stone

Material

SS 304

01/01/2020

Dimensions are in inches

Linear Tolerance: +/- .015

Bend Tolerance: +/- .020

Angular Tolerance: +/- 0.5

Radial Tolerance: +/-.005

55.723

14.731

1.437

52.849

5.929

1.751

.500

3.313

11.857

1.437

48.564

Clear Opening

9.497

Clear Opening

Through hole

mounting points for

frame installation

Dimensions shown are the actual physical

dimensions. Additional clearances to the cabinetry

are dependent on the tolerances of the cut-out. The

suggested cut-out dimensions are listed in the chart

below but these dimensions can be reduced if the

tolerances are controlled. Please refer to the

product manual for installation instructions.

Summary of content (5 pages)

PAGE 1
REVISION HISTORY Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled. Please refer to the product manual for installation instructions. REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 52.849 1.437 3.313 55.723 .500 11.857 9.497 Clear Opening 14.731 5.
PAGE 2
REVISION HISTORY Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled. Please refer to the product manual for installation instructions. REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 44.370 1.437 3.313 47.244 .500 11.857 9.497 Clear Opening 14.731 5.
PAGE 3
REVISION HISTORY Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled. Please refer to the product manual for installation instructions. REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 38.370 1.437 3.313 41.244 .500 11.857 9.497 Clear Opening 14.731 5.
PAGE 4
REVISION HISTORY Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled. Please refer to the product manual for installation instructions. REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 32.370 1.437 3.313 35.244 .500 11.857 9.497 Clear Opening 14.731 5.
PAGE 5
REVISION HISTORY Dimensions shown are the actual physical dimensions. Additional clearances to the cabinetry are dependent on the tolerances of the cut-out. The suggested cut-out dimensions are listed in the chart below but these dimensions can be reduced if the tolerances are controlled. Please refer to the product manual for installation instructions. REV DESCRIPTION - Engineering Release DATE 01/01/2020 APPROVED Todd Stone 26.370 1.437 3.313 29.244 .500 11.857 9.497 Clear Opening 14.731 5.