Charcoal Grill User Manual

7
NOTE TO GAS TECHNICIAN:
The installation of this appliance must be in accordance with:
1) All applicable local codes, or in the absence of local codes:
2) i) Canada: must conform to current National Standard CAN/CGA B149.1/.2 -
natural gas/propane installation code.
ii) U.S.A.: must conform to national Fuel Gas Code, ANSI Z2223.2, 1988 or latest
edition.
DO NOT perform any pressure tests on this appliance or the regulator supplied in
excess of 1/2 PSIG.
DO NOT install any gas handling components/materials affected by elevated
temperatures within 18” of any side of this appliance.
Make sure that the supply line is of adequate capacity to accommodate the higher inputs
of these broilers before you begin. They are significantly higher input than average
“BBQ’s”.
The use of a typical corrugated metallic appliance connector is recommended for
connecting the appliance, with a minimum diameter of 1/2”.
Model Input
BI-30 64,500 BTUH
BI-36 79,500 BTUH
BI-48 99,000 BTUH
Orifice sizes and manifold pressures are indicated on the rating plate.
You are encouraged to explain any provisions or concerns you may have regarding the
placement of your equipment near or within the supporting structure and the
surroundings. Please forward any suggestions you may have should the gas supply
components pose any aesthetic problems that the property owner may be concerned
with before you begin.
Should you have any questions or require technical assistance, please call Crown Verity
Inc. at 519-751-1800.
CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8
TEL: [phone] FAX: [phone]
www.crownverity.com
Email: [e-mail]