Installation Manual

MID POWER
4 x 37dBm Output
5G NR Compli
© Sunwave IM_CF_M2 v2.0.1 | 25 of 51
Contact us today:
www.sunwave.com
[e-mail]
Attach E2-O Handle
Attaching a 19" Mounting Bracket
1. Attach the 19" mounting brackets at the
front of the E2-O, using 4 screws M3×16
per bracket and the Phillips screwdriver.
Observe the orientation of the brackets.
Attach Sliding Rails and E2-O to Rack
Attached Sliding Rails
1. Attach the sliding rails
Ⓑ
to the rack
Note: the sliding rails are not included in
the delivery.
Place E2-O in Rack
2.
Place the E2-O in the rack
Fix E2-O with Screws
3.
Secure the E2-O using 2 screws M6×16 on
both sides and the Phillips screwdriver.