PART LIST (Ships Separately) Top Panel Left Panel Right Panel Back Top Panel Front Top Rail 1PC 1PC 1PC 1PC 1PC Back Top Rail Front Middle Rail | Back Bottom Rail Bot torn Panel Left Partition Panel 1PC 1PC 1PC 1PC M N O Right Partition Top Vertical Back Partition Back Panel Adjustable Shelf Panel Panel Panel 1PC 1PC PCs PCs PCS Middle Adjustable Drawer Front Drawer Left Panel |Drawer Right Panel| Drawer Back Panel Shelf Panel 1PC PCS PCS PCS PCS Drawer Bottom Left Door Panel | Right Door Panel Owe! Bar Lef
PART LIST EZD N Support Bar Support Panel Towel Bar Small Towel Bar | Small Towel Bar Panel PCS 1PC 1PC PCS 1PC ZF ZG Locking Caster Leg PCS PCS PCS
HARDWARE LIST Cam Lock Cam Bolt Wood Dowel Long Bolt Screw 19 PCS (Extra 2) 18 PCS 55 PCS (Extra 1) 14 PCS 16 PCS (Extra Barrel Nut Shelf Holder Knob Round Head Bolt Large Round Head Screw 8 PCS PCS 6 PCS 6 PCS 16 PCS (Extra Double Magnet Magnet Round Head Allen Wrench Long Screw Screw 1PC PCS 6 PCS (Extra 1) 1PC 7 PCS (Extra (Spare Part) Short Bolt Flat Washer Spring Washer | Adjustable Leveler Pin Hinge PCS (Extra) | PCS (Extra) 4 PCS (Extra 1) PCS (Extra 4) ADDITIONAL TOOLS (Not Provided) Note: It is not
Step 1. Insert cam bolts (part #2) into top panel (part A), left panel (part B), right panel (part C), towel! bar left panel (part X) and towel bar right panel (part Y) using fillips head screwdriver. NOTE: Do not over tighten cam bolts. Stop tightening once threads on cam bolt are no longer visible. Step 2. Attach knobs (part #8) to drawer front panels (part Q), left door panels (part V) and right door panels (part W) using round head bolts (part #9) and fillips head screwdriver.
Step 3. Attach front top rail {part E) to top vertical panel {part L) using wood dowel (part #3), long screw {part #15) and fillips head screwdriver. With front top rail (part E) flat on ground, attach front middle rail (part G) and back top rail {part F) to top vertical panel (part L) using wood dowels (part #3), long screws (part #15) and fillips head screwdriver. NOTE: Please ensure screws are aligned with the per-drilled holes in top vertical panel {part L) before tightening. #w [x3 #15] x3 Step 4.
Step 5. Attach back partition panels (part M) to back top panel (part D) using wood dowels (part #3). Slide back panels (part N} into grooves of right panel (part C), back top panel (part D) and back partition panels (part Step 6. Attach back bottom rail {part H) to back partition panels (part M), back panels (part N) and right panel {part C) using wood dowels (part #3) and cam lock (part #1). NOTE: Cam locks must rotate a full 180°. See pictured insert.
Step 7. Attach left panel (part B) to assembled unit (parts using wood dowels (part #3) and cam locks (part #1). NOTE: Cam locks must rotate a full 180°. See pictured insert. Bx6 #3 X5 Step 8. Attach double magnet (part #11) and magnets (part #12) to front middle rail (part G) using round head screws (part #13) and fillips head screwdriver. Attach left partition panel {part J) and right partition panel (part K) to back top rail (part F) and front middle rail (part G) using wood dowels (part #3).
Step 9. Attach bottom panel (part |) to assembled unit (parts using wood dowels (part #3), long bolts {part #4}, barrel nuts (part #6) and Allen wrench (part #14). #3 1 x10 #14™5x1 Step 10. CASTER INSTALLATION Attach locking casters (part ZE) and casters (part ZF) to bottom panel (part I} using large round head screws (part #10) and fillips head screwdriver.
Step 11. LEG INSTALLATION Attach adjustable levelers (part #19) to legs (part ZG). Attach legs (part ZG) to bottom panel (part I} using wood dowels (part #3), flat washers (part #17), spring washers (part #18), short bolts (part #16) and Allen wrench (part #14). 19 Step 12. Insert towel bar (part ZB) and support bars (part Z) into towel bar left panel {part X). Attach support panel (part ZA) to towel bar left panel (part X) using wood dowels (part #3) and cam lock (part #1).
Step 13. Carefully tum unit upright. Secure left partition panel (part J) and right partition panel {part K) to back top rail (part F) and front middle rail {part G) using long screws (part #15) and fillips head screwdriver. Attach assembled unit (parts left panel (part B) using long bolts (part #4) and wood dowels (part #3). Attach small dowel bar panels (part ZC) to right panel (part C} using long bolts (part #4) and wood dowels (part #3).
Step 15. Attach left door panels (part V) and right door panels (part W) by placing bottom pin hinge (per-installed in door} in the per-drilled hole of bottom panel {part I). Then depress the top spring-loaded pin hinge so it can be placed in the per-drilled hole of front middle rail (part G). Place shelf holders (part #7) into desired position. NOTE: Be sure top and bottom pin hinges are fully extended to secure doors in place. Step 16. Slide assembled drawers into place.