PART LIST Left Side Panel | Right Side Panel Top Shelf Middle Shelf Seat Panel 1PC 1PC 1PC 1PC 1PC Bottom Panel [Middle Back Panel| Top Back Panel [Bottom Back Panel| Door Panel 1PC 1PC 1PC 1PC PCS
HARDWARE LIST @ Safety Strap Kit 1PC ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly.
Please do not use tools to assemble this unit unless specifically indicated. Reference the images above any time the instructions state "lock the hardware". Note: Be sure to check all hardware is locked when completed. Step 1. Attach hooks (part #1) to middies back panel (part G) using short screws (part #8) and fillips head screwdriver.
Step 2. Attach handles (part #4) to door panels (part J) using round head bolts {part #5) and fillips head screwdriver. Step 3. Attach magnets (part #6) to left side panel (part A) or right side panel (part B) using magnet screws (part #7) and fillips head screwdriver. Note: If door panels open on right, then attach magnets (part #6) to left side panel (part A). If door panels open on left, then attach magnets (part #6) to right side panel (part B). Please refer to Page 8, Step 8.
Step 4. Attach top shelf (part C), middle shelf (part D), middle back panel (part G), seat panel (part E) and bottom panel (part F) to right side panel (part B) using wood dowels (part #2), Allen bolts (part #9), Allen wrench (part #10) and lock the hardware. Step 5. Attach left side panel (part A) to assembled unit (parts using wood dowels (part #2), Allen bolts (part #9), Allen wrench (part #10) and lock the hardware.
Step 6. Carefully turn unit upright. Attach top back panel (part H) to assembled unit (parts using long screws (part #3) and fillips head screwdriver. #3 =f x10 Step 7. Attach bottom back panel (part |) to assembled unit (parts using long screws (part #3) and fillips head screwdriver.
Step 8. There are two installation options for door panels (part J). Attach door panels (part J) by placing bottom pin hinge (per-installed in door) in the per-drilled hole of middle shelf (part D) and bottom panel (part F). Then depress the top spring-loaded pin hinge so it can be placed in the per-drilled hole of top shelf (part C) and seat panel {part E). NOTE: Be sure top and bottom pin hinges are fully extended to secure doors in place.
011s D8 x 3/4" D8 x Safety Strap Kit| Wall Anchor Washer Short Screw Long Screw | Safety Wall Strap) 1PC 1PC 2 PCS 1PC 1PC 1PC SAFETY WALL STRAP INSTALLATION Note: It is highly recommended to install this safety strap kit to prevent tipping, damage and/or injury. 1. Insert short screw (C) through washer (B), safety wall strap (E) and attach to middle back panel (part G) using fillips head screwdriver. 2. Drill a hole where you want to secure the unit.