HARDWARE LIST #1 & #2 HA & #5 ADDITIONAL TOOLS (Not Provided) Notelet is not recommended 1o use power fools during assembly.
Step 1. Attach knobs (part #6) to the drawers using round head bolts (part #7) and Phillips head screwdriver. Step 2. Attach side rail (part E} to right front leg (part C) and back leg (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver. Attach side rail (part E) to left front leg (part B) and back leg (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver.
Step 3. Carefully lay top panel (part A) upside down on a soft surface and open drawers as shown. Attach assembled legs (parts top panel (part A) using flat washers (part #5), spring washers (part #4), hex socket head bolts (part #3), and Allen wrench (part #8) as shown below. Step 4. Attach back rail (part F) to back legs (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver.