Dining Bench CF8021
PART LIST A B D C E Seat Left Leg Right Leg Leg Support Center Support 1 PC 2 PCS 2 PCS 2 PCS 2 PCS HARDWARE LIST #1 #2 M6 x 60mm #3 #4 M6 x 40mm #5 M6 x 13mm 1/4x19" Long Bolt Bolt Spring Washer Flat Washer Large Flat Washer 8 PCS (Extra 1) 4 PCS (Extra 1) 12 PCS (Extra 1) 4 PCS (Extra 1) 8 PCS (Extra 1) #6 #7 M4 x 38mm M4 Screw Allen Wrench 4 PCS (Extra 1) 1 PC ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly.
Step 1 . Lay seat (part A) upside down on a soft surface, such as carpet. Attach legs (parts B & C) to seat (part A) using long bolts (part #1), spring washers (part #3), large flat washers (part #5) and allen wrench (part #7). Attach leg supports (part D) to legs (parts B & C) using screws (part #6) and phillips head screwdriver. NOTE: Please do not fully tighten bolts until unit is fully assembled.
Step 3 . Attach center supports (part E) to seat (part A) and leg supports (part D) using bolts (part #2), spring washers (part #3), flat washers (part #4) and allen wrench (part #7). NOTE: Please fully tighten all bolts at this time. #2 #3 #2 #7 #4 D #2 #2 #3 #3 #4 #4 #3 #4 E D E A #2 #3 #4 #7 Step 4 . Carefully turn assembled unit upright.
