Framed Mirror 1 1pc Knob Ø29*27mm A 1pc Long Screw Ø4*57mm D 4pcs Support Plate Adjustable shelf 1pc 2 Round Head Bolt Ø5/32"*19mm 3 Shelf Support Ø6.5mm 1pc B 3pcs C 12pcs Wall Anchor Ø8*38mm 4pcs E EXTRA HARDWARE LIST ADDITIONAL TOOLS ( Not Provided) Note: It is not recommended to use power tools during assembly. You may use power tools to assist in mounting the safety strap kit to the wall.
Hold the Support Plate (2) in the desired location of the wall unit. This plate will be about 2-1/2” lower than the top of the wall unit. Making sure the Support Plate (2) is level, use a pencil to mark the anchor locations using the Support Plate (2) screw holes as a guide. We recommend using a leveler to make sure the Support Plate (2) is oriented correctly. -Drill two 11/32” holes in these marked spots and tap the Wall Anchors (E) into the drilled holes.
Insert Shelf Supports (C) into predrilled holes at desired shelf heights. Insert Adjustable Shelves (3) into Shelf Supports (C) . Attach Knob (A) to cabinet door using Round Head Bolt (B) . Adjust the hinge if the door is loosened or tight .