PART LIST N Door Panel 1PC ° : Top Panel Left Brace Right Brace Upper Fixed Back Cross Bar Panel 1PC 1PC 1PC 1PC 1PC Seat Panel Upper Partition Back Middle Brace| Lower Partition Left Panel Panel Panel 1PC 1PC 1PC 1PC 1PC [Hmm Right Panel Bottom Panel Top Back Panel |Middle Back Panel| Bottom Back Panel 1PC 1PC 1PC PCS 1PC P
HARDWARE LIST 28*30mm 1/4mp5/32" Wood Dowse Hook Bronze Screw Handle Round Head Bolt 30 PCS (Extra 1) PCS 6 PCS PCS PCS Cam Bolt Cam Lock Magnet Round Head Bolt Screw 14 PCS 14 PCS (Extra 1) 1PC 2 PCS (Extra 1) 14 PCS 77y Barrel Nut Allen Wrench Left Hinge Right Hinge Short Screw 6 PCS 1PC 1PC 6 PCS Left Safety Hinge Right Safety Hinge| Long Screw Screw Safety Strap Kit 1PC 1PC 8 PCS 48 PCS (Extra 1) 18ET ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly.
Step 1. Attach hinges (parts #13 & #14) to door panel (part P) using short screws (part #15) and fillips head screwdriver. Attach handles (part #4) to door panel (part P) using round head bolts (part #5) and fillips head screwdriver. Attached hooks (part #2) to back cross bar (part E) using bronze screws (part #3) and fillips head screwdriver. #Dada px2 #5 v x4 #1340 x1 #142x1 #15-x 6 Step 2. Attach magnet (part #8) to seat pane! (part F) using round head screws (part #9) and fillips head screwdriver.
Step 3. Attach upper fixed panel (part D) to right brace (part C) using wood dowel (part #1) and cam locks (part #7). NOTE: Cam locks must rotate a full 180°. \\g\ o See pictured insert. patroon Step 4. Attach back cross bar (part E) to right brace (part C) using wood dowel (part #1) and cam locks (part #7). NOTE: Cam locks must rotate a full 180°. o See pictured insert.
Step 5. Attach left brace (part B) to assembled unit (parts D & E) using wood dowels (part #1) and cam locks (part #7). NOTE: Cam locks must rotate a full 180°. \\g\ U S See pictured insert. @ 2 7 Step 6. Attach top panel (part A) and upper partition panel (part G) to assembled unit (parts using wood dowels (part #1), bolts (part #10) and Allen wrench (part #12). o NOTE: Cam locks must rotate a full 180°. \\é\ See pictured insert.
Step 7. Attach seat panel (part F) and back middle brace (part H) to assembled unit (parts using wood dowels (part #1), bolts (part #10) and Allen wrench (part #12). ~F10 HOT Mo x6 #10/x 4 #12~x 1 Step 8. Attach lower partition panel (part |} and panels (parts seat panel (part F) using wood dowels (part #1) and cam locks (part #7). NOTE: Cam locks must rotate a full 180°. U See pictured insert. \\é\
Step 9. Attach door panel (part P) by placing hinges in the per-drilled holes of panels (parts J & K). Step 10. Attach bottom panel (part L) to assembled unit (parts using wood dowels (part #1), bolts (part #10), barrel nuts (part #11) and Allen wrench (part #12).
Step 11. Carefully turn unit upright. Attach back panels (parts assembled unit (parts using screws (part #19) and fillips head screwdriver.
Step 12. Attach safety hinges (parts #16 & #17) to panels (parts J & K) and door panel (part P) using long screws (part #18) and fillips head screwdriver. Important: Safety strap kit (part #20) must be installed to prevent tipping, damage and/or injury.
De3/4” I Safety Strap Kit Wall Anchor Washer Short Screw Long Screw Safety Wall Strap 18ET 1PC PCS 1PC 1PC 1PC SAFETY WALL STRAP INSTALLATION Note: It is highly recommended to install this safety strap kit to prevent tipping, damage and/or injury. 1.Insert short screw (C) through washer (B) and safety wall strap (E) and attach to top panel (part A) using fillips head screwdriver. 2.Drill a 11/32" hole where you want to secure the unit.