Installation guide
Crestron HD-XSP 7.1 High-Definition Professional Surround Processor
Operations & Installation Guide – DOC. 7446A 7.1 High-Definition Surround Processor: HD-XSP • 33
d. Repeat steps b and c for each octet.
e. To save the IP address and return to the “Network Setup” menu, move
the cursor to the rightmost octet and press SELECT. To cancel the
operation and return to the previous screen, press BACK.
If any changes were made, the HD-XSP reboots upon exiting the
“Installer” menu.
Configure Front Panel
Settings for the HD-XSP’s front panel controls are set from the Control section of
the “Installer” menu. To configure the front panel controls:
1. Open the “Installer” menu as described in “Open “Installer” Menu” on page
23.
2. Press ∧ or ∨ to highlight Control and press SELECT. The “Control” menu
is displayed.
“Control” Menu
Control
Backlight
Front Panel Lock: Off
Password
Restore Defaults
3. Press ∧ or ∨ to highlight the parameter to view or configure and press
SELECT.
Backlight
The backlight of the LCD display can be adjusted. To adjust the backlight:
1. Open the “Control” menu as described in “Configure Front Panel” above.
2. Press ∧ or ∨ to highlight Backlight and press SELECT. The backlight
toggles between dim and bright.
Front Panel Lock
The front panel user controls can be locked or unlocked for operation.
NOTE: The “Installer” menu can still be opened when the front panel is locked.
To lock or unlock the front panel controls:
1. Open the “Control” menu as described in “Configure Front Panel” on page
33.
2. Press ∧ or ∨ to highlight Front Panel Lock: On or Front Panel Lock: Off
and press SELECT. The setting toggles between “On” and “Off”.
NOTE: When locked, only the BACK button can be used to access the
“Installer” menu.