Specifications

Crestron Commercial Lighting Design Guide
Doc. 4775B | Crestron.com 39
Versiport
Configured as a digital input, the Versiport senses a contact closure or logic level signal from devices such as
motion detectors, partition sensors, alarm panels, 12V triggers, and all types of switches and relays. As an analog
input, the Versiport can sense changes in a resistance or DC voltage level, working with everything from
temperature and light sensors to water level meters to volume control potentiometers. As a digital output, the
Versiport provides a logic level closure signal to trigger control and alarm inputs on a variety of external devices.
DIN-HUB
The DIN-HUB is a Cresnet hub designed to facilitate the
configuration of large Cresnet networks. DIN Rail mounting
enables modular installation alongside Crestron DIN Rail
lighting and automation control modules and other third-party
DIN Rail mountable devices.
• 3-segment Cresnet hub
• 20 additional Cresnet devices per segment
3-Segment Cresnet Hub
Cresnet is the communications backbone for Crestron lighting
modules, wall box dimmers, shade controllers, thermostats,
keypads, touch screens, and many other devices. Cresnet
normally supports up to 20 Cresnet devices without requiring a
hub. Adding a DIN-HUB allows more devices. The DIN-HUB
features three isolated Cresnet segments, each supporting an
additional 20 devices, allowing for systems of approximately 80
devices total (including the "host" segment). More hubs may be
added to allow up to a maximum potential of 252 devices.
DIN-BLOCK
The DIN-BLOCK is a DIN Rail-mounted Cresnet distribution
block designed to facilitate the termination of Cresnet wiring at
a head end or distribution point. DIN Rail mounting enables
modular installation alongside Crestron DIN Rail lighting and
automation control modules and other third-party DIN Rail
mountable devices.
• 12-port Cresnet distribution block
• Detachable screw terminal blocks for easy termination
and troubleshooting
• Split power bus for flexible 24V power distribution
• Diagnostic LEDs for network power and data
• Passive device — no programming required
Cresnet Distribution
Cresnet is the communications backbone for Crestron lighting
modules, wall box dimmers, shade controllers, thermostats,
keypads, touch screens, and many other devices. Cresnet allows for combinations of homerun and daisy chain
wiring, and the DIN-BLOCK provides a simple means for connecting up to 12 separate Cresnet cables as part of
any sized network.