User`s guide

Installing Creative PC-CAM 930 Slim 4-4
received a Recovery Disk, the necessary Windows files may already be located
at c:\windows\options\cabs (replace c:\ with the drive letter of your hard
disk drive).
Note: Windows 98 is available in various editions. Be sure to use the correct
edition for your system.
2. In the Insert Disk dialog box, click the OK button.
3. When the New Hardware Found message boxes close, wait approximately 5
seconds.
4. Press and hold the Mode button.
The mode selection menu appears.
5. Use the Function buttons to select the PC Mode icon.
6. Use the Function buttons to select PC-CAM mode.
Windows loads camera and video drivers for your camera.
7. If an Unsafe Removal of Device dialog box appears, click the OK button.
8. If Windows starts copying captured images to your computer, click the Cancel
button.
9. Click the Finish button and restart your computer if you are prompted to do so.
Installing as a
Mass Storage
Device
1. Use the Function buttons to select the PC Mode icon.
A PC Connect menu appears.
PC-CAM 930 Slim.book Page 4 Monday, February 14, 2005 11:42 AM