Installation Guide

How to connect the Sound Blaster Audigy Rx / Audigy 5 to 7.1 Speaker
System – Female RCA Connectors
The diagram below illustrates the cables required (purchased separately) to connect 7.1 speaker
systems with female RCA connectors to the Sound Blaster Audigy Rx / Audigy 5.
Cables required (purchased separately)
(A) 1 set of 3.5 mm jack to Male RCA audio cable
• For Front Left and Front Right
Example of a suitable cable:
https://www.amazon.com/dp/B003L91J16
(B) 2 sets of 3.5 mm jack to Male RCA AV cable
• 1 set for Rear Left, Rear Right, and Side Right
• 1 set for Center / Sub and Side Left
Example of a suitable cable:
https://www.amazon.com/dp/B08F3F9F66
Note:
Different speaker systems may implement the connection for 7.1 differently, hence, the actual
connection may vary. Try swapping between the White, Red, or Yellow connectors to get the correct
channels.
(A) 3.5 mm jack to Male RCA audio cable
(B) 3.5 mm jack to Male RCA AV cable
Sound Blaster Audigy Rx / Audigy 5
7.1 Speaker System with
Female RCA Connectors