Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 Attach 4 leg mounts to the leg frame. Fit split in mount over

tube and orient with the wider side up. Slide each mount as

close to the metal plate as possible.

3 - allen screws

Thank you for purchasing the Gio Barstool. This

page lists all the contents included in the box.

Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

COMPONENTS

1 - seat

1 - leg frame

x 4

Wide side

faces up

Page 1 of 2

Missing hardware? Please call 800.606.6387

for replacements.

GIO 24" & 30" BARSTOOLS

Made in Italy

4 - feet

TOOLS REQUIRED

Allen Wrench (included)

Hammer

4 - leg mounts

PAGE 1
GIO 24" & 30" BARSTOOLS HARDWARE 3 - allen screws 4 - leg mounts 4 - feet Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Gio Barstool. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
GIO 24" & 30" BARSTOOLS A B 2 Place leg frame upside down. Insert 4 feet in tube ends, gently tapping with hammer if necessary. 3 A. Loosely attach leg frame to seat bottom using 3 allen screws. Do not fully tighten. B. Stand the chair upright and make sure the seat is properly aligned with the leg frame. Make any necessary adjustments. x3 5 Slide all 4 leg mounts away from the center and out towards the legs until they can no longer be moved. Assembly is now complete.