Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
Made in Denmark r04 Page 3 of 3
8 A) Fit 2 end panels onto the assembly, aligning the cam
screws and dowels. Secure the 4 cams on each end panel
with a phillips head screwdriver.
B) Conceal all exposed cams with cam covers. Press firmly
to secure.
CHECKERS QUINTUPLE SHELVING
6 Align dowels of shelves with corresponding holes in side
panel and firmly fit into position.
7 With the assistance of another adult, fit remaining side
panel onto assembly. Make sure pilot holes on panel edge
face back as shown. Lock top cams of each back panel by
turning each clockwise with a phillips head screwdriver.
Pilot holes
face back
Pilot holes
face back
9 If combining multiple shelving units, be sure to connect the
units together with the mending plates at each set of
adjacent pilot holes. Fasten each mending plate with 2
screws. Assembly is now complete.
NOTE: UNITS ARE INTENDED TO STACK VERTICALLY AND
SHOULD NOT BE STACKED MORE THAN 5 CUBES HIGH.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
Shown with
optional
Checkers
Metal
Bases
B
A
Customer Service 800.967.6696 | www.crateandbarrel.com