Assembly Instruction

Made in Vietnam - r02 Page 2 of 5
1 Fit dowels of right side panel into corresponding holes of
back frame as shown. Secure side panel with 3 bolts, 3
spring washers and 3 flat washers, using a phillips head
screwdriver. Do not over tighten the bolts.
BRIGHTON CHIFFOROBE
3 Fit dowels of partition into corresponding holes of
back panel as shown. Make sure glides of partition and
right side panel face each other.
partition
4 Fit dowels of left side panel into corresponding holes
of assembled unit as shown. Secure side panel with 3
bolts, 3 spring washers and 3 flat washers.
2 Fit slot of bottom panel onto corresponding crossbar of
back panel as shown. Secure bottom panel to assembled
unit with 4 bolts, 4 spring washers and 4 flat washers.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
right side
panel
back
frame
NOTE: Do not
over tighten
the bolts
bottom
panel
left side
panel