Owners manual

ManualsBrandsCraftsman ManualsLawn & Garden71-24278 Tractor Snow Cab

Operator's Manual

Model No. 486.24278

SNOW CAB

PRINTED IN U.S.A. FORM NO. 28119 (08/17/15)

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

www.sears.com/craftsman

CAUTION:

Before using this product, read

this manual and follow all Safety

Rules and Operating Instructions.

• Safety

• Assembly

• Operation

• Maintenance

• Parts

STOP

DO NOT RETURN TO STORE

For Missing Parts or Assembly

Questions Call 1-866-576-8388

Summary of content (8 pages)

PAGE 1
Operator's Manual ® Snow Cab Model No. 486.24278 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. STOP DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 • • • • • Safety Assembly Operation Maintenance Parts Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman PRINTED IN U.S.A. FORM NO.
PAGE 2
SAFETY RULES Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • • • • This cab provides foul weather protection only. It does not provide protection against exhaust fumes, collision, rollover or other accidents. Read the snow cab and vehicle owner's manuals and know how to operate your vehicle before using the snow cab attachment.
PAGE 3
CARTON CONTENTS 1. 2. 3. Base Assembly Weight Bracket Drawbar Bracket 4. U-Tube 5. Upright Tubes (2) 6. Rope 7. 8. 9.
PAGE 4
ASSEMBLY LOCATE MODEL LABEL OF TRACTOR • STEP 1: (SEE FIGURE 1) Look under your tractor seat and locate the serial number as shown. Refer to the chart below and check that your tractor is compatible. • Assemble the drawbar bracket to the base assembly using four 5/16" x 1" hex bolts and 5/16" nylock nuts. See figure 3. Do not tighten yet. • Attach the weight bracket to the base assembly using four 5/16" x 1" hex bolts and 5/16" nylock nuts.
PAGE 5
STEP 3: (SEE FIGURE 3) • STEP 5: (SEE FIGURE 5) Assemble the upright tubes to the base assembly using two 5/16-18 x 2" carriage bolts (from outside) and two 5/16" flat washers and plastic knobs (from inside). PLASTIC KNOB • • 5/16" x 2" CARRIAGE BOLT Install a footrest clamp with preassembled bolt onto the front edge of each footrest, with the bolt underneath the footrest. Raise the tractor's hood.
PAGE 6
STEP 6: (SEE FIGURE 6) • • OPERATION Assemble two spiral hooks into holes on top of u-tube at front of tubing frame. Insert ends of rope down through spiral hooks attached to u-tube and then insert ends through two grommets in front of canopy. Read this owner's manual and safety rules before operating your tractor with the Snow Cab. CAUTION: Watch out for low tree limbs and other overhead objects which may interfere with the snow cab.
PAGE 7
REPAIR PARTS ILLUSTRATION 486.
PAGE 8
Product questions or problems? 1-888-331-4569 Customer Care Hot Line Get answers to questions, troubleshoot problems, order parts, or schedule repair service. Para respuestas a preguntas o problemas, y ordenar piezas o pedir servicio para la reparación de su equipo. To help us help you, register your product at www.craftsman.com/registration Para poderte ayudar mejor, registra tu producto en www.craftsman.