Owner’s Manual CRnFTSMBN Double Insulated BUFFER/POLISHER SYSTEM Model No. 646.10620 CAUTION: Read and follow all safety rules and operating instructions before first use of this product. Safety Accessories Operation Maintenance Parts Español Save this manual for future reference. Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit our Craftsman website: www.sears.
SAFETY RULES A A WARNING: Read and ÂÊk¿j\ understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS. WORK AREA • Keep your work area clean and well tit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
TOOL USE AND CARE • Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. • Maintain tools with care. Properly maintained tools are less likely to bind and are easier to control. • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
C FOR LIQUID WAX Apply three swirls of liquid wax on the wax applicator bonnet. DO NOT APPLY WAX DIRECTLY TO CAR. This first application should do about 1/4 of the car. The bonnet will not absorb as much when reloading. ALWAYS START AND STOP THE POLISHER ON OR AGAINST THE SURFACE. Place the extension cord over your shoulder and do flat surfaces first—hood, trunk and roof. Cover areas quickly with broad, sweeping strokes in a criss-cross pattern.
MAINTENANCE • Terrycloth bonnets are 100% cotton and can be machine-washed in cold water with a small amount of detergent, then machine-dried at low heat. However, hand-washing and air drying is recom mended for longer terrycloth bonnet life. TO REPLACE PAD ASSEMBLY • Wax applicator bonnets are to be used only once, then thrown away. • To prolong pad life and shape, always store polisher with pad face up.
PARTS LIST 1?. r i1 A i 1 ! l! 11—A KEY NO PART NO. KEY NO. DESCRIPTION QTY. PART NO. DESCRIPTION QTY. 41P26217 Housing too 1 6D 41P21500 Armature 1 ■1 1 6E 41P23200 2 41P25500 Cord strain relief assy. Magnet, yoke assy. 2 1 6G 1 Switch lead wire Motor plate assy.
NOTES/NOTAS
Get it fixed, at your home or ours! For repair of major brand appliances in your own home.., no matter who made it, no matter who sold it! 1 -800-4“MY-HOME^^ Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment, and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.
