Operator`s manual

TOGGLE "ON/OFF" SWITCH (Fig. 12)

Your router motor Is turned "ON" and '_OFF" by the toggle switch located

on the top cap of the motor housing

The tell side of the toggle switch hood (as you lace it) is marked "1"for "On" and

lhe right side {as you face it) is marked "O" for "Off"

TO TURN THE MOTOR "ON", Push the toggle switch Io the ie{l side marked "1".or "On"

TO TURN THE MOTOR "OFF' Push the toggle switch to Ihe right side marked "O_ or "Off"

A_ways holdthe router and cutter bit away from

the workpiece when turning the loggle switch

"On" Only contact the workpiece wffh the

router and cutter btl ailer the router has reached

lullspeed ONLY remove the router and cutter

bit Item the werkpiece AFTER turning the router

motor "OFF". and the cutter bit comes loa

complete stop

SOFT START FEATURE

Electronic feedback eontreI minimizes torque Iwist customary in larger router molors,

by timiting the speed at which the motor slarls This increases the molor's iife

LED WORKLIGHTS (Fig. 13)

Your rouler motor has 3 built-in worklights located

around the cottetlnuI to provide high visibillty of

workpiece when cuttlng.Ti_ese lights are always

"On" when the toggle switch ts in the "On" position

Fig "13 _,:

"LIVE TOOL INDICATOR" LIGHT (Fig. 14)

Your router also has a "LIVE TOOL INDICATOR"

green light, Iooaled on the meier housing

top cap where the power cord enters the motor

housing This green light is always on when

router motor is plugged into power source

17543