OWNERS MANUAL MODEL NO. 315.27441 CAUTION: Read Rules for Safe Operation and Instructions Carefully CRAFTSMAN. INDUSTRIAL GRINDER DOUBLE DIE INSULATED SAVE THIS MANUAL Warranty Introduction FOR FUTURE REFERENCE Operation Repair 612547-871 10-00 SEARS, Parts ® Designed exclusively for and sold only by ROEBUCK AND CO.
FULL ONE YEAR WARRANTY ON CRAFTSMAN INDUSTRIAL DIE GRINDER If this Craftsman Industrial Die G_nder fails due to a defect of purchase, Sears will repair it, tree of charge¸ WARRANTY SERVfCE IS AVAILABLE IN THE UNITED STATES. This warranty grv_s you specific Sears, BY SIMPLY legal rights, Roebuck and in matehal RETURNING or workmanship THE TOOL and you may also have other Co., DEPT.
RULES FORSAFEOPERATION (Continued) 11. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses, 12. PROTECT YOUR LUNGS. Wear a face or dust 25 KEEP HANDS AWAY FROM GRINDING AREA, 26. NEVER USE IN AN EXPLOSIVE ATMOSPHERE, Normal sparking of the motor could ignite fumes, 27, INSPECT TOOL CORDS PERIODICALLY and if damaged, have repaired at your nearest Sears Repair Center. Stay constantly aware of cord location. 28.
OPERATION CUSTOMER INSTRUCTfONS 1. DO read thoroughly INTRODUCTION and OPERATING INSTRUCTIONS before using your GRINDER. DON'T use your GRINDER before reading thoroughly INTRODUCTION and OPERATING INSTRUCTIONS. 2. DON'T leave Grinder unattended before disconnecting from power source. 2. DO disconnect power cord when cleaning or doing maintenance on tool. 3. DON'T force tool, allow Grinder to perform as it was designed, 3.
OPERATION Ccoo.°ued) For ease of operation and maintaining proper controL hold your Grinder with both hands as shown in Clamp or otherwise secure the work to prevent it from shifting. Always point the cutter so that if it should slip there is no danger to any part of your body. Never wear loose clothing or jewelry when operating your Grinder. They could get caught in moving parts causing injury. Always keep head away from grinding area.
OPERATION DO EXCEED THESE GRINDING WHEEL SIZES Plain Wheels Shaped Wheels 1/4" Mandrel 1/4" Mandrel Wheel Dia. Wi,!h Ovel hang NOT (Cont.) Wheel Thickness Wheel Dia. 3/4 1 1 1-1/2 1-1/4 1 3/4 5/8 1/2 3/8 1/8" Wheel Thickness 1 3/4 11/16 1/2 1/4 1 1-1/8 1-1/4 3/4 1-1/16 1/8" Mandrel Mandre_ Wheel Dia. Wheel Thickness 1 3/4 5/8 1/2 3/8 1/8 1/4 1/4 3/8 1/2 Wheel 1/4 5/8 1/2 3/8 Dia.
OPERATION (Cont.) WiRE HANGER -- (See Fig. 5). A wire hanger is provided for your convenience and ease of storage. To install, insert the ends of the hanger into the holes on each side of the grinder housing. LUBRICATION All the bearings in this tool are lubricated with a suf. ficient amount of high grade lubricant for the life of the unit under normal operating conditions, therefore, no further lubrication is required, NOTE: When being used with Tool Post Holder, Item No.
THE FOLLOWING RECOMMENDED ACCESSORIES ARE CURRENT AND WERE -AVAILABLE AT THE TIME THIS MANUAL WAS PRINTED 1 1 2 2 MOUNTED 3 GRINDING 4 5 6 POINTS Grinding point heads are made of aluminum oxide and are mounted on "finch x 1/4 inch steel shafts. Suitable uses are finish cutt]ng or die cutting, Key Item No.
NOTES Page 9
CRAFTSMAN INDUSTRIAL DIE GRINDER -- MODEL NUMBER 315.
.CRAFTSMAN INDUSTRIAL DIE GRINDER -- MODEL NUMBER 315.27441 The Model Number will be found on a plate attached to the Motor Housing. Always mention the Model Number in ag correspondence regarding your iNDUSTRIAL DIE GRINDER or when ordering repair parts. t I I PARTS LIST Key No, Part Number 1 621248-001 1/8" 2 989985-003 Co!let 3 611866-001 Rubber 4 714281-000 Wrench ..................................................... 5 611833-003 Spindle Housing ..................................
Get it fi×ed; at your home Qr ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME sMAnytime, day or night (1 "800-469"4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center, 1-800-488-1222 Anytime, day or night www.sears.