'S MANUAL 3/8 in., 18 VOLT CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.113860 A WARNmNG: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck Visit the Craftsman and Co., 3333 Bevedy Rd., Hoffman Estates, IL 60179 USA web page: www.sears.
ONE YEAR FULL WARRANTY ON (;RAFTSMAN TOOL Hfthis Craftsman tool faits to give complete satisfaction within one year from date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS PARTS & REPAIR OENTER IN THE UNITED STATES, and Sears wil! replace it, free of charge. Hfthis Craftsman tool is used for commercial purchase.
WARNING!READANDUNDERSTAND ALLIN= STRUCT[ONS. Failureto followai!instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA [] Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. [] Do not operate power tools in explosive atmospheres, such as in the presence of flammable liq_ uids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
SERVICE [] Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. [] Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator. [] Know your power tool. Read operator's manual carefully.
_ [] An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electdc shock. If extension cord must be used, make sure: WARNmNG! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow al! instructions listed below, may result in electdc shock, fire and/or serious personal injury. a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger.
Someof the followingsymbolsmaybe usedon this tool. Pleasestudythemand learntheirmeaning.Proper interpretation of thesesymbolswillallowyouto operatethe too!betterandsafer. SYMBOL NAME DESIGNATION/EXPLANATmON V Volts Voltage A Amperes Current Hz Hertz Frequency(cyclespersecond) W Watt Power min Minutes Time m,_ AlternatingCurrent Typeofcurrent -.
Thefollowingsignalwordsandmeanings areintendedto explainthe levelsof riskassociatedwiththisproduct. SYMBOL SIGNAL MEANING DANGER: Hndicates an imminently hazardous situation, which, if not avoided, wil! result in death or serious injury. WARNING: Hndicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Hndicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
PRODUCT SPECIFICATIONS Chuck ............................................................................................................................................................... 3/8 in. Keyless Motor ...................................................................................................................................................................... 18 Volt DC Switch ..............................................................................................................
KNOW YOUR DRmLL-DRmVER See Figure 1. Before attempting to use this product, familiarize yourself with all operating Features and Safety Rules. KEYLESS CHUCK Your drill-driver has a keyless chuck that allows you to hand tighten or release ddll bit in the chuck jaws. SWITCH DmRECTmON OF ROTATmON SELECTOR Your drill-driver has a forward/reverse above the switch trigger. selector located WRmST STRAP A wrist strap is provided to reduce the chances of dropping your drill-driver.
UNPACKmNG WARNING." Hfany parts are missing do not operate this too! unti! the missing parts are replaced. Failure to do so could result in possible serious personal injury. This product has been shipped completely assembled. [] Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. WARMNG: Do not attempt to modify this tool or create accessories not recommended for use with this toot.
CHARGING THE BATTERY PACK [] The battery pack wl(I become sllght(y warm to the touch whi(e charging. This is normal and does not lnd(cate a prob(em. The battery pack for this tool has been sh(pped (n a (ow charge condition to prevent poss(b)e prob(ems. Therefore, you shou(d charge ovem(ght prior to use. [] Do not p(ace charger in an area of extreme heat or co(d. (t wi(I work best at normal room temperature. NOTE: Batteries wi(( not reach fu(( charge the first time they are charged.
SWmTCH See Figure 3. To turn your ddl! ON, depress the switch trigger. To turn it OFF, release the switch trigger. FORWARD/ REVERSE SELECTOR BATTERY PACK VARmABLE SPEED See Figure 3. This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. DEPRESSLATCHESTO RELEASEBATTERYPACK NOTE: You might hear a wMstling or ringing noise from the switch during use.
INSTALUNG BraTS See Figure 5. See Figures 5 o 7. This too! has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The dril!ing direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.
REMOVmNG BraTS ADJUSTABLE See Figures 5 and 8. Your drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of matedal and the size of screw you are using. m Lock the switch trigger by placing the direction of rotation selector in center position. m Loosen the chuck jaws from drill bit.
BiT STORAGE DRILLING See Figure 10. See Figure 12. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your ddll. $CBEWDRIVEBBiT m m_ i b Fig. 10 ,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. Fig. 12 When drilling hard smooth surfaces use a center punch to mark desired hole location.
_ WARNmNG: Whenservicing,useonlyidentical Craftsman replacement parts.Useofanyotherpart maycreatea hazardor causeproductdamage. _ WARNmNG: Alwayswearsafetygogglesor safety glasseswithsideshieldswhenusingcompressed air to cleantools.Iftheoperationis dusty,alsoweara dustmask. _ WARNUNG: Toavoidseriouspersonalinjury,always removethe batterypackfromthetoolwhencleaning or performing anymaintenance. GENERAL MAmNTENANCE HE× KEY Avoid using soIvents when cleaning plastic parts.
TO RETmGHTEN A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble. Periodically check chuck screw for tightness. m hsert hex key into chuck and tighten chuck jaws se= cutely. Tap hex key sharply with a mallet in a clockwise direction. This will tighten chuck on the spindle. To tighten: m Open the chuck jaws and remove hex key. m Tighten the chuck screw. Lock the switch trigger by placing the direction of rota= tion selector in center position.
CRAFTSMAN 3/8 in., 18 VOLT CORDLESS DRmLL-DRmVER - MODEL NO. 315.113860 [ The mode! number will be found On a plate at{ached to the mOtOr hOusing. AlwaYs mention the mode! number in al! correspondence SEE BACK regarding your DRILL-DRIVER PAGE FOR PARTS or when ordering repair parts. ORDERING J _NSTRUCT_ONS 2 4 PARTS Key No. L_ST PaA Number Description 1 6612001 Screw (Special) ................................................................................................