f SAVETHIS MANUALFOR FUTURE REFERENCE owner's manual MODEL NO. 113.177135 CRRFTSMRN® Serial Number Model and serial numbers may be found on the handle. You should record both model and serial numbers in a safe )lace for future use, FOR YOUR SAFETY 2 GALLON WET/DRY VAC • operating • maintenance READ ALL INSTRUCTIONS CAREFULLY J Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
FULL ONE YEAR WARRANTY ON CRAFTSMAN WET/DRY VACS If this Craftsman Wet/Dry Vac fails due to a defect in material or workmanship within one year from the date of purchase, retum it to your nearest Sears Store, and it will be replaced or repaired, at Sears option, free of charge. If this Craftsman Wet/Dry Vac is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty applies only while this product is used in the United States.
• To reduce the risk of injury from accidental starting, unplug power cord before changing or cleaning filteE • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • Do not use with damaged cord, plug or other parts. If your Wet/Dry Vac is not working as it should, has missing parts, has been dropped, damaged, left outdoors, or dropped into water, return it to a Sears Service Center.
Grounding Instructions This appliance must be grounded. If it should malfunction or breakdown, rounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING: 3-Prong Plug Properly Grounded Outlet fltg} -....
Introduction This vac is intended for household use only. It may be used for light vacuuming of wet or dry media and may also be used as a blower, The light weight design allows usage for most small household vacuuming chores, Familiarize yourself with the following product features and read the entire owner's manual for specific usage of your new wet/dry vac.
Getting to Know Your Vac Tool Storage \ Blowing Port • \ Two Easy-to-Open Latches -- Carry Handle with On/Off Switch Conveniently Positioned / Six Foot Long Cord Vacuum Port Hose Storage Cord Wrap Storage Two Gallon Capacit_ Dust Drum Filter and Retainer Band 4'x Flexible Hose with Dual Swivel Ends Cord Storage Coil the power cord tightly around the dust drum.
Operation WARNING To reduce the risk of fire or explosion, do not operate this vac in areas with flammable gases, vapors or explosive dust in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent type cleaners, oilbase paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but are not limited to: coal, magnesium, grain or gun powder. Do not vacuum explosive dust, flammable or combustible liquids or hot ashes.
Operation Vacuuming (continued) Dry Materials 1.The filter must always be in correct position to reduce the risk of leaks and possible damage to vac. Make sure that the filter is completely covering the filter cage and that the retainer band is as close to the lid as possible. Make sure there are no gaps between the filter and the lid. (See illustration). It is very important to assemble the filter to the cage without allowing any possible leaks or tears.
Emptying the Drum 1. Remove the power head assembly of the wet/dry vac by pulling outward on the latches located on each side of the vac. Lift off the power head assembly. WARNING: To reduce the risk of I injury from accidental starting, unplug power cord before emptying the drum. Blowing 2. Dump the drum contents into the proper waste disposal container. Feature Your vac contains a blowing feature. It has the capability to blow sawdust and other debris.
Maintenance Take the dirty filter to a disposal container and gently brush away small dirt particles that may be adhering to the filter material. Filter WARNING: To reduce the risk of I injury from accidental starting, unplug power cord before changing i IMPORTANT: After cleaning, check the filter for tears or small holes. Do not use a filter with holes or tears in it. Even a small hole can cause a lot of dust to come out of your vac. Replace it immediately. or cleaning filter.
Maintenance (continued) Cleaning Storage To keep your Wet/Dry Vac looking its best, clean the outside with a cloth dampened with warm water and mild soap. Before storing your vac, the dust drum should be emptied and cleaned. The cord should be wrapped around the unit and the hose should be stored as described in the cord/hose storage section in this manual. Accessories should be kept in the same area as the vac so they can be readily available. The vac should be stored indoors. To clean the drum: 1.
For the repair or replacement parts you need Call 7 am - 7 pm, 7 days a week t -8OO-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Repair Service Center in your area Carl 24 hours a day, 7 days a week I||ll| 1-800-488-1222 For information on purchasing a Sears Maintenance Agreement or to inquire about an existing Agreement Call 9 am - 5 pro, Monday-Saturday 1-8OO-627-6655 SEAJ S Amer_a_