User manual

CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 4.2

You may have changed the administrator password during initial setup using the First Time Setup Wizard. Log in using

your personalized administrator password.

If you have forgotten your personalized password, you can reset the MBR1400 to factory defaults. When you reset the

router, the administrator password will revert back to the Default Password. Press and hold the reset button on the

router unit until the lights flash (approximately 10-15 seconds). You can then log in using the Default Password.

4.1.1 Router Details

The Administrator Login page includes a quick-reference section that shows the following information:

Router Details

• Model Number: MBR1400

• Internet Connection: Connected/Disconnected

Wireless Details

• Status: Enabled/Disabled

• Clients: The number of attached users

• Channel: The channel number

• Name: The name of the primary network (if you have more than one wireless network enabled, the additional

network names will also be listed here)

Modem Details (if you have a business-grade/USB/ExpressCard data modem attached)

• Manufacturer: The name of the modem manufacturer (CradlePoint, Novatel, etc.)

• Model: The name of the modem model

• Signal: The strength of the signal (dBm)

• Mode: LTE, EVDO, HSPA, etc.