User Guide

CounterPath Corporation

RTP Port Start Change this value only if advised to do so by your VoIP service provider.

This indicates the start of the ports range used for RTP and RTCP sessions. The range is

100 ports wide. The range is not observed if ICE is used. The default is 4000.

Audio Codecs Selection Tap to display more information about these two fields. See page 56.

Video Codecs Selection Appears after the Video Calls premium feature is purchased. See page 57.

Verify TLS Cert Applies only if you use TLS as the transport.

• On (default): Bria attempts to verify the certificate, sent by the SIP server, to see if it is

trusted. For the certificate to be trusted, a corresponding CA certificate, provided by

your VoIP provider, must be installed on your device (using the iPad Configuration

Utility for example).

• Off: Bria accepts the certificate without attempting to verify it.

Alert In Background • On: Bria sends notifications when an account fails to register. Bria also notifies the

user after the account is successfully re-registered. Make sure that Bria notifications

are enabled under iOS Settings.

• Off (default): Bria does not send notifications regarding account registration errors.

Support RPort • On: the outgoing INVITE message will have an RPort parameter inside the Via

header, which indicates that Bria supports RFC 3581. If the server also supports RFC

3581, the server should respond with the RPort parameter set to the incoming public

IP port and the received parameter set to the public IP address. This is the default

behavior in previous Bria versions.

• Off: Bria does not have the RPort parameter in the Via header.

Support PRACK • On: Bria advertises that it supports “100rel” and allows PRACK, as defined in RFC

3262. The outgoing INVITE message will have “100rel” in the Supported header and

“PRACK” in the Allow header. This is the default behavior in previous Bria versions.

• Off: Bria will not advertise these features; there will be no “100rel” in the Supported

header.

Hash in URI Encoded • On (default): Bria escapes a hash character (#) used in the user part of SIP URI, as

required by RFC 3261.

• Off: Bria does not escape a hash character and sends it as is. Turn this setting off if you

are having trouble making outgoing calls to a number with a hash character.

Verbose Logging Leave this setting OFF unless customer support instructs you to turn it ON in order to

troubleshoot a problem you are having on your device. See page 61.

Send Log Tap to upload the current log to customer support. See page 61.

Call Statistics To show detailed information about the current/last call. For example, the number of

packets lost.

For an ongoing call, the statistics information refreshes every second. Tapping the

Refresh button stops auto refresh and presents you with a snapshot of the most current

statistics. To enable auto refresh again, either long-tap the Refresh button, or leave the

statistics page and come back again.

Field Description