Upholstered Bed Frame with Storage Cadre de Lit Rembourré avec Rangement HU10439 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady and stable surface.
ASSEMBLY INSTRUCTION INSTRUCTION DE MONTAGE IMPORTANT NOTE: *** PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CARPET TO AVOLD THE PARTS FROM BEING SCRATCHED *** BEFORE YOU BEGIN, KINDLY FOLLOW THE ASSEMBLY INSTRUCTION STEP BY STEP *** DO NOT TIGHTEN ALL SCREWS AND BOLTS UNTIL THE ASSEMBLY IS COMPLETED /REMARQUE IMPORTANTE : *** PLACEZ TOUTES LES PIÈCES SUR UNE SURFACE PROPRE ET LISSE, TELLE QU'UN TAPIS OU UNE MOQUETTE, POUR ÉVITER DE LES RAYER.
1 x2 7 x2 HEADBOARD /TÊTE DE LIT 8 x2 2 x1 CONNECTOR /CONNECTEUR BED RAILS BRACKETS /SUPPORTS DE RAILS DE LIT 9 x4 3 x2 FOOTHEAD /TÊTE DE PIED 4 x1 SLATS /TRAVERSINE 10 x4 FOOTBOARD /PLATEAU DE PIED SUPPORT LEGS /JAMBES DE SOUTIEN 11 x2 5 x4 BED FEET /PIEDS DE LIT CENTER SUPPORT RAILS /SUPPORTS DE RAILS CENTRAUX 12 x4 6 x2 SIDE RAILS L /RAIL LATÉRAL GAUCHE 04 SIDE RAILS R /RAIL LATÉRAL DROIT SLATS /TRAVERSINE
A F x1 FLAT WASHERS /RONDELLES PLATES Φ5/16" x13mm ALLEN KEY /CLÉ ALLEN B G x8 H x8 BOLTS /BOULONS Φ5/16"x30 mmL D J x4 BOLTS /BOULONS Φ1/4"x70 mmL x22 FLAT WASHERS /RONDELLES PLATES Φ1/4" x19mm BOLTS /BOULONS Φ1/4"x40 mmL E x18 FLAT WASHERS /RONDELLES PLATES Φ1/4" x11mm I x10 x8 FLAT WASHERS /RONDELLES PLATES Φ5/16" x19mm BOLTS/BOULONS Φ1/4"x45 mmL C x8 x32 SCREWS /VIS Φ4x25mm 05
1 2 I D H 1 2 B H I 3 1 06
3 4 5 4 H I D A 7 6 H D A I H I D A 6 7 8 H I D A 7 8 8 6 8 07
5 G F A C G 08 A F C
6 9 9 11 10 A E I 9 11 10 09
7 12 12 12 8 J 10 12
EN Return / Damage Claim Instructions DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted. Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts. Take a photo of the damaged part (if applicable).
USA office: Fontana AUS office: Truganina GBR office: Ipswich If you're having difficulty, our friendly customer team is always here to help. FRA office: Saint Vigor d'Ymonville USA:cs.us@costway.com AUS:cs.au@costway.com GBR:cs.uk@costway.com FRA:cs.f r @costway.
