Installation Manual

OVEN LP/PROPANE GAS CONVERSION
STEP 1 - Remove Bake Burner Cover
Open your oven door and unscrew the back
two screws of bake burner cover. Remove the
bake burner cover.
37
STEP 2 - Remove Flame Spread Plate
Unscrew the four screws of the flame spread
plate. Remove the flame spread plate.
STEP 3 - Slide Out Burner
Unscrew the front two screws holding the
burner in place. Slide out the burner up and
towards oven door out of the socket, careful
not to sever or pull on the wire.
STEP 4 - Change the Burner Orifice
Move the burner carefully to gain access to
the burner orifice, careful not to sever or pull
on the wire. Proceed with changing the
orifice, similarly to step 2 on page 4.