Use and Care Manual

Step 9: Position the dishwasher under the countertop
1. Make sure that the wires are secure under the dishwasher and not pinched or in
contact with door springs or other dishwasher components.
TIP: Check tub insulation blanket, if equipped. It should be positioned so it is not
bunched up or interfering with door springs. Check by opening and closing the door.
2. Push the dishwasher into the cabinet. The front corners of the dishwasher door
should be flush with the cabinet doors. Be careful not to dent the front panel with
your knees or damage the countertop or cabinets with dishwasher parts.
Step 10: Level the dishwasher
IMPORTANT: The dishwasher must be level for proper dish rack operation and wash
performance.
Use adjustable wrench and level.
1. Open the door, then place a level on the door and on the rack track inside the tub to
make sure that the dishwasher is level.
2. Level the dishwasher by adjusting the
four leveling legs individually.
TIP: Pull the lower rack out about halfway.
Make sure that the rack does not roll
forward or back into the dishwasher. If the
rack rolls in either direction, you must level
the dishwasher again.
3. If the door hits the tub, the dishwasher is not installed correctly. Adjust the leveling
legs to align the door to the tub.
Page 15