Installation Guide

Ventilating Openings Oven Connection

Ventilating openings

When cooking is finished, or in a Pause state or in Standby

Mode -AND- if the oven's center temperature is over 160 de-

grees, the cooling fan will continue working for 15 minutes, -OR-

when the oven's center temperature becomes lower than 160

degrees, the cooling fan will stop in advance.

This appliance must properly installed and grounded by

a qualified technician. Ask your dealer to recommend a

qualified technician or an authorized repair service.

This appliance is manufactured with a green GROUND wire

connected to the oven chassis. After making sure that the

power has been turned off, connect the flexible conduit from

the oven to the junction box using a U.L. listed conduit con-

nector. Figures 1 and 2 and the instructions provided below

present the most common way of connecting the ovens.

Your local codes and ordinances take precedence over

these instructions.

Complete electrical connections according to local codes and

ordinances “WARNING” Risk of Electric Shock, frame

grounded to neutral of appliance through a link.

Grounding through the neutral conductor is prohibited for

new branch-circuit installations (1996 NEC); mobile homes;

and recreational vehicles, or in an area where local codes

prohibit grounding through the neutral conductor.

For installations where grounding through the neutral

conductor is prohibited:

• Disconnect the ground from the neutral at free end of

conduit

• Use grounding terminal or lead to ground unit

• Connect neutral terminal or lead to branch circuit neutral in

usual manner