Installation Guide

1110
Clock Setting
After connecting the unit to the power, the numbers "12:00" will
show on the display.
1.) Press " ", the hour number will flash.
2.) Press " " to adjust the hour number; time should be within
numbers 0 through 12.
3.) Press " ", the minute number will flash.
4.) Press " " to adjust the minute number; time should be
within numbers 0 through 59.
5.) Press "Clock" to finish the clock settings; symbol ":" flashes,
and the time will be illuminated.
NOTE: This is a 12-hour clock. After oven is powered on, if the
clock is not set, it will show "12:00" on display.
Function Setting
1.) Press " " to choose a cooking function. The related
function indicator will light up. Continue pressing until desired
function is selected.
2.) Press " " to adjust the cooking time and adjust the
temperature before pressing " " to switch.
3.) Press " " to begin cooking.
4.) If Step 2 is skipped, press " " to confirm the start of
cooking; default time is 9 hours, default temperature will display
on the LCD.
Operation Instructions
Operation Instructions
Function Setting Notes
• After connecting the unit to the power, the numbers "12:00"
will show on the display.
• The step quantities for the adjustment time of the coding
switch are as follows:
0--0:30 min: step 1 minute
0:30--9:00 hour: step 5 minutes
• The step quantities for the adjustment of temperature is 5°C /
25°F and " ". " " cannot adjust the temperature.
• Press " " to adjust the cooking time when cooking begins.
Then press " " to confirm. If " " not pressed within 6
seconds, the oven will revert back to the previous time to
continue cooking.
• Press " ", " " shows, then press " " to adjust the
temperature when cooking begins. Then press " " to start
cooking. If " " not pressed within 6 seconds, the oven will
revert back to the previous time to continue cooking.