User Guide

Datalog 3 User Manual - Page 14 of 66
CORTECH DEVELOPMENTS LTD
Green Icon
If a green icon is displayed on a map, the zone at that position, whose number is on the icon, is currently
undergoing an engineers soak test.
In this mode the system will log changes of zone state but will not generate alarms. Engineers testing
new equipment or troublesome detectors use it. The option is set in Engineer Setup.
The zone name will display when the operator places the mouse pointer on the icon.
Grey Icon
If a grey icon is displayed on a map, the zone at that position, whose number is on the icon, is currently
enabled and secure i.e. normal.
The zone name will display when the operator places the mouse pointer on the icon.
Right clicking the mouse button allows the operator to Inhibit the zone or to set the Inhibit Timer for the
time interval before the zone enables.
The grey icon will only be found on the map viewer, normal zones do not display dynamically on the
main screen.
Maroon Icon
If a maroon icon is displayed on a map, the zone at that position, whose number is on the icon, has
been disabled by the Engineer Setup option.
The zone name will display when the operator places the mouse pointer on the icon.
This icon is displayed even when the option Show Dynamic Display is not set.
Red Icon
If a red icon is displayed on a map, the zone at that position, whose number is on the icon, is currently
inhibited and not secure.
The zone name will display when the operator places the mouse pointer on the icon.
Right clicking the mouse button allows the operator to enable the zone or to set the Inhibit Timer for the
time interval before the zone enables. However if the zone is not secure when the inhibit is removed, the
Datalog system will generate an alarm for that zone.
Yellow Icon
If a yellow icon is displayed on a map, the zone at that position, whose number is on the icon, is
currently inhibited and secure.
The zone name will display when the operator places the mouse pointer on the icon.
Right clicking the mouse button allows the operator to enable the zone or to set the Inhibit Timer for the
time interval before the zone enables.