Installation & Assembly

1, Install the arm onto the ball.

CAUTION:

a) Don't hold lamp socket cap, hold the slim

arm to twist;

b) Twist the arm 10times anticlockwise before

pushing the wire into the ball.

2, Thread the main wire through the down

rods, and mount the down rods.

3, Mount the ceiling plate with the down rod.

Fix the grounding wire onto the screw A.

grounding wire

4, Fix the mount bracket onto the ceiling with

screws B.

GND

5, Wire connection.

GND

6, Mount fixture mainframe onto the mount

bracket.

7, Mount the bulbs.

Input Voltage: 110~120V 50/60Hz

Wattage: E26 Max 60W *12, Bulb Not Included

Product Size: Ø 28.35in(72cm) * H 14.96in(38cm) after bulbs are mounted

3pcs 11.81in(30cm) down rods, 1pcs 5.91in(15cm) down rod, 1pcs sloped ceiling adaptor

SPECIFICATION

INSTAATION DIAGRAM

CAUTION

WHITE (OR RIBBED) WIRE

GROUND WIRE GROUND WIRE

CAUTION

USER MANUA

PAGE 1
USER MANUA CAUTION INSTA ATION DIAGRAM 1, Install the arm onto the ball. 3, Mount the ceiling plate with the down rod. Fix the grounding wire onto the screw A. CAUTION: a) Don't hold lamp socket cap, hold the slim arm to twist; b) Twist the arm 10times anticlockwise before pushing the wire into the ball. 6, Mount fixture mainframe onto the mount bracket. grounding wire A 4, Fix the mount bracket onto the ceiling with screws B. 7, Mount the bulbs.
PAGE 2
twist the arm 10 times anticlo push the wire into center ball, twist the arm clockwise thread power cable ' through down rods t NOTE: connect m re down rods if you want to hang the handelier lower. mount down rods ith center ball.