Installation Instructions

E62-M3-L

7 Bands SISO

Part 90 warning:

“WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALL

ERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register

Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-

boosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of

$100,000 for each continuing violation.”

This document describes the installation procedure for the E62-M3-L unit.

This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST

have an FCC LICENSE or express consent of an FCC License to operate this device. NOTE: Only authorized person can

enter the area where the antenna is installed. And the person is fully aware of the potential for exposure and can

exercise control over his or her exposure by leaving the area or by some other appropriate means. Awareness of the

potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a

RF safety program.