Installation Instructions

COMMON STAINS
A FEW NOTES OF CAUTION
¡ Ketchup: Wipe up with a damp cloth. If the ketchup has dried, wash it off with mild detergent and warm water.
¡ Coffee: Wash off with mild detergent. For dried coffee stains, repeat as needed.
¡ Juices: Clean residue with mild detergent and water.
¡ Glue: Apply Goo Gone
®
to remove adhesives.
¡ Marker/Crayon: Wipe with a soft cloth with acetone.
¡ Drain cleaners containing lye will permanently damage Corinthian
™
surfaces. If you spill a drain cleaner, wipe it up
immediately and rinse several times with water.
¡ Hair, textile and food dyes can cause permanent stains. If dye should happen to spill, wipe it up immediately with
dishwashing detergent or an all-purpose cleaner.
¡ Rust removers contain harsh chemicals which can quickly cause permanent color changes. If a spill occurs, wipe
off all residue immediately, wash thoroughly with soapy water and rinse several times.
¡ Avoid cutting directly on your countertop, always us a cutting board.
For Everything Corinthian
™
has to Offer,
Visit www.midwestmanufacturing.com
¡ Brochures
¡ Videos
¡ Installation Instructions
¡ Detailed Warranty Information
¡ Features and Benefits Guides
¡ Inspirational Images
Questions or Concerns:
For guest assistance contact countertop help
by sending an email to:
[e-mail]
CARE & MAINTENANCE - Corinthian
To clean the surface, wash with a mild dish washing liquid or powdered detergent; add warm water. Use a soft dish
cloth. Rinse with warm water and dry with cloth. Water is generally all that is needed. A quick wipe will clean most
stains.
Periodically go over the entire surface with a mild abrasive cleaner or a wet blue Scotch-Brite
®
pad to maintain
a uniform appearance. For Harder to remove spots, use an all-purpose cleaner or bathroom cleanser. Follow the
manufacturer’s instructions. Rinse with warm water and dry with a soft cloth. Please note, do not use cleansers that
contain harsh abrasives.
For stubborn spots, scrub the stained area with a mild abrasive cleaner using a blue Scotch-Brite
®
pad, working on a
circular motion.
Factory integrated sinks will use the same process outlined above. In addition, to keep the sink bright occasionally ll it
¼ full of water and add 1-2 cups of bleach. Wipe the sides and the bottom, let stand for 15 minutes, drain and rinse.
While Corinthian
™
Solid Surfaces have durable nishes, you should not cut directly on the surface or lay any utensils
warmer than approximately 170t°F on the countertop for extended periods of time. Hot pans and heat-producing
appliances (such as electric griddles and skillets), when set directly on the countertops, can damage the countertop.
Always use a hot pad or a trivet. Pre-warm your sink bowl with hot tap water before pouring any boiling water into the
sink in order to avoid possible heat damage.
Corinthian
™
Solid Surfaces color and pattern are consistent throughout, allowing the tops to be renewed over and over.
Scratches can be removed using the solid surface renishing kit (SKU 485-4283) available in the Cabinet & Appliances
department at your local store.
7/25/18