LIMITED WARRANTY We offer a limited warranty that this product is free from defects in materials and workmanship for a period of one (1) year from the original date of purchase. At its discretion, we may provide replacement parts for defective parts to original purchaser after its own review and examination. Original receipt or proof of purchase as well as proof of defect is required. We will not be responsible for shipping costs incurred outside the continental USA.
WARNING: AN To reduce the risk of serious injury, read the following safety instructions thoroughly before assembling and using the gazebo. * Check with your local governing authority/local municipal codes regarding installation and permitting of such structures before assembly. ¢ Use of personal protective equipment including gloves, safety glasses, and closed toe footwear is recommended during assembly. * Requires two or more people to assemble and install safely and correctly.
Hardware List 1 im Mont 244 | 8 tem § Meo 2 mm @) Moxie meas ST4.
(i) di=d2 Before proceeding with Step 5, ensure that the frame is rectangular by ensuring the diagonal dimensions are identical, the beams are level and that the posts are at 90 degree angle to the beams and are plumb.
Note: hd 1. Let one person stand on the ladder io lift "LSA" and hold and Ist others fasten the screws connecting both ends of "D2". 2. Please hold "L5A" until all the "D2" screws ars installed.
Step Attention: Please male sure the groove sides of the panel face outwards. When install the Roof Plates (52) onion 62) short side, please detach the right end of Roof Rib (G1) first. And then install the right end of Roof Rib (G1) again after 52 is installed.
Step Méx15 a 2 X 12x 3 F2 The two offset holes should be near the middle ejector rod 11.8in 11.
Om © Mé6x45 7) 12x Note: When install the rooftop plates, if the roof plates are slightly uneven, please press the screws from the top of the plates until the bottom screw thread is exposed and then screw on the nut.