User guide

ManualsBrandsCooper Security ManualsHome building and Decori-on160EX

4. Administration i-on160

Page 64

1. Make sure the display shows

the standby screen.

i-on160EX

12:20 02/11/2010

2. Press .

Enter Access Code

( )

3. Key in your access code (or

present a tag).

Omit Zones >

4. Press n until you see:.

System Config >

5. Press Y.

The bottom line of the display

shows:

SYSTEM CONFIG

Facilities On/Off >

6. Press Y .

The bottom line of the display

shows the current status of the

Chime facility: “On” means the

loudspeakers will sound a

chime tone every time a

detector with the “Chime”

attribute is triggered.

FACILITIES ON/OFF

Chime On

7. Press >.

The status of the Chime facility

changes each time you press

FACILITIES ON/OFF

Chime Off

8. Press Y when you have

finished making changes.

SYSTEM CONFIG

Facilities On/Off >

Setting the Date and Time

You will need to re-program the date and time if the control unit

loses power for an extended time, and the battery is exhausted.