User guide

4. Administration i-on160

Page 44

If the control unit has already

learned that remote control

then you will hear a low tone

and the display tells you that

the remote control is already

in use.

If you do not wish to register a remote control press X.

If you have a remote control and want to know who it belongs to

then use the Test - Remotes menu option, see page 52 .

Panic Alarms (PA)

No user can change any other user’s PA. (A Master User or Admin

User can register a PA for a new user when they first add the user

to the system, see page 47.) Any user except a Guard or Set

Only user can register a PA for themselves.

Note: While you are registering a new PA the control unit will not

respond to an alarm signal from any PA it has already

learned.

1. Make sure the display shows

the standby screen.

i-on160EX

12:20 02/11/2010

2. Press .

Enter Access Code

( )

3. Key in your access code (or

present a tag).

Omit Zones >

4. Press n .

Users >

If you are a Master or Admin User:

5. Press Y.

USERS

Add User >

a) Press n.

USERS

Edit User >

b) Press Y.

EDIT USER

User 01 >

c) Press u or n. until the

bottom line of the display

shows your own user name.

EDIT USER

User 003 >