Instructions / Assembly

ManualsBrandsContractors Wardrobe ManualsCloset Doors59 in. x 80-1/2 in. Trim Line Bright Clear Aluminum Frame Beveled Mirror Interior Sliding Closet Door

Installation Instructions

Model Trim Line

Contractors Wardrobe

DESIGNERS • MANUFACTURERS • TOLL FREE: (800) CW-DOORS • (800) 293-6677 • www.cwdoor.com

26121 Avenue Hall • Valencia, CA 91355 • (661) 257-1177 • FAX: (661) 257-4907

9, 10

Steel Wheel

Assembly (#13)

9, 10

Illustrated Parts

Breakdown (IPB)

NO. QTY PART # PART DESCRIPTION

#1 2 Mirrored Glass Panels

#2 1 A1012 Ultraglide

Top Channel

F2020 with Felt Liner

#3 1 A2020 Bottom Track

#4 1 W0101 Wood Strip

#5 6 S0095 #8 x 1-1/2″ PH SMS Screw

#6 4 S0055 #8 x 1/2″ Truss Screw

#7 2 HMA Mirror Handles

#8 2 B0101 Clear Plastic Bumper

#9 4 N2030 Concrete Nail

#10 4 N1030 5 Penny Nail

#11 4 A4350 Side Mold with 2-Way Tape

#12 4 A4350 Top and Bottom Mold

with 2-Way Tape

2 Top and 2 Bottom

#13 4 W8020 Steel Wheel Assembly

#14 16 S0084 #6 x 3/8″ Hex Head Screws

Trim Line Instructions/0309 3/10/09 9:41 AM Page 1

Summary of content (4 pages)

PAGE 1
Trim Line Instructions/0309 3/10/09 9:41 AM Page 1 Installation Instructions Model Trim Line ® Illustrated Parts Breakdown (IPB) NO.
PAGE 2
Trim Line Instructions/0309 3/10/09 9:41 AM Page 2 FLOOR CHECK LIST Congratulations on purchasing your new CW® Wardrobe Doors. Now that you have opened the package, we want you to verify that you have all the necessary hardware supplied with your doors. 1. Do you have carpet? It is highly recommended that if you have carpet and do not have a cut-out in the carpet already, you should cut the carpet in order to install the Bottom Track (#3).
PAGE 3
Trim Line Instructions/0309 3/10/09 9:41 AM Page 3 INSTALLING THE DOORS STEP 1 Removing the Existing Doors Remove existing doors, brackets, top channel and bottom track. STEP 2 Installing the Top Channel A. Measure the opening at the top of the closet from wall to wall. B. Cut the new Top Channel (#2) to this dimension. When cutting the Top Channel (#2) we recommend that you use a Miter Box and Hacksaw for a straight cut. Cut one side only.
PAGE 4
Trim Line Instructions/0309 B. C. 3/10/09 9:41 AM Page 4 STEP 6 Installing the Clear Plastic Bumpers Pick up one Panel (#1) and, with the mirror facing you, tilt the top of the Panel (#1) back and slip the Panel (#1) into the back runner of the Top Channel (#2). Next, set the bottom of the Panel (#1) into the back runner of the Bottom Track (#3). Peel paper off the back of the Clear Plastic Bumpers (#8) and place on the edge of the Panel frame 36″ up from the bottom.