Specification Sheet

Concrete Sealers USA | P.O. Box 1223 | Brookeld, WI 53008-1223
Toll-Free: 888.583.2991 | Fax: [phone] | Emergency: 800.424.9300
[e-mail] | www.concretesealersusa.com
Technical Data Sheet
Continues on next page
Page 1
Product Description
Recommended Uses
Product Characteristics
PS110 is a high performance, water based, siloxane water repellent and impregnating agent for porous concrete, brick, stucco, block, and
other masonry. PS110 is a proprietary, aqueous emulsion of siloxane/silane oligomers. It contains a special additive to enhance water resis-
tance and a catalyst to ensure the optimum chemical reaction necessary for maximum water repellency. The active ingredients in PS110 are
a mixture of different size particles to ll different size voids. This ensures good penetration into porous substrates, resulting in good cover-
age rates and excellent water repellency. The active ingredients in PS110 will penetrate into the surface and chemically react and bond with
the substrate ensuring longer lasting protection. It combats eforescence, freeze/thaw damage, deicing chemicals, acid rain deterioration,
salt intrusion, UV damage, scaling and spalling, dirt buildup and staining, mold and mildew, alkali attack, and corrosion of reinforcing steel.
PS110 is not lm forming and preserves the natural breathing characteristics of treated substrates. It is also UV resistant and nonyellowing.
PS110 has a milky white appearance. Upon proper application, the substrate will have little, or no, noticeable change in appearance when dry.
PS110 was originally developed for commercial and industrial applications and is widely used throughout North America to this day for those
applications. Concrete Sealers USA is now also making this professional grade sealer available to the residential market so small contractors,
applicators, and do-it-yourselfers can enjoy the same superior benets that architects, engineers, and large contractors have enjoyed for
years. PS110 is recommended for sealing porous concrete, brick, stucco, block, stone, exposed aggregate, mortar, and grout. It is ideal for
sealing commercial and residential structures such as parking lots and structures, marine structures, loading docks, median barriers, bridge
decks, concrete pavement, piers, ramps, plazas, courtyards, and balconies. It is also recommended for home and building exteriors, brick
walls, block walls, chimneys, driveways, sidewalks, walkways, porches, steps, pool decking, patios, brick or stone pavers, concrete pavers,
and retaining walls. Suitable for horizontal or vertical and interior or exterior applications. Not intended for below grade waterproong.
SDS Information / Physical and Chemical Properties
Boiling Point: 212° F
Vapor Pressure: N/A
Solubility in Water: Yes
Evaporation Rate: N/A
Appearance and Odor: Milky White w/ Mild Odor
Specic Gravity: (H
2
0-1): .99
% Volatile by Volume: 100 g/L
Coverage Rates*: 125-250 sq. ft./gal. for concrete, brick, and block surfaces.
pH: 6-9
Flashpoint: >212° F
Flammable Limits: Lower Limit: N/A; Upper Limit: N/A
Finish: Flat/Clear
Drying Time**: Dry to touch 1-3 hours; trafc 6-12 hours
Shelf Life: 2 years unopened
PS110 Siloxane Water Repellent WB-10 Penetrating Sealer
Low VOC, Water Based Sealer for All Concrete, Brick & Block Masonry
*Coverage rates are approximate and for estimating purposes only. Application rate based upon porosity and absorption. Always test absorption prior to application.
**Drying times are for estimating purposes only. Actual drying time is based upon temperature and humidity.