Operations Manual

Page 6
Belt clip installation
M-216 SNAP-ON BELT CLIP (Included)
Belt clip removal
c. Turn on the transmitter with program from the audio source being fed to
the transmitter. Observe the audio “voice” level modulation indicator. A full
bright LED indicates full audio compression at 100% modulation. For best
performance, the audio input gain should be adjusted for some low level
LED luminescence during normal audio levels with occasional full bright
peaks indicating 100% modulation.
d. When using the auxiliary audio input with the microphone plugged into
the transmitter, priority should be given to the microphone gain adjustment.
The mixing balance between the auxiliary audio and the microphone should
be made with the volume control of the auxiliary audio source.
Note: The optional microphone mute switch only affects the
microphone. It does not affect the auxiliary audio input.
M-216 OPERATING INSTRUCTIONS