Operations Manual

Page 5
M-216 OPERATING INSTRUCTIONS
Auxiliary Audio Input Operation
The M-216 transmitter may transmit from a
variety of audio sources such as tape and C.D.
players, TV and VCR’s, or any audio device
having an auxiliary or line level audio output.
The auxiliary input cable supplied with the
M-216 transmitter (CB-36 ST) will operate
with any device having a mini 3.5 mm
jack, stereo or mono, and with line level or
earphone level output.
To accommodate a variety of specialty
applications, auxiliary input cables
with RCA phono plug, 1/4” audio
phone plug, and XLR connectors are
available from COMTEK.
Setup
a. Plug the micro-mini
screw lock whip antenna
into the top center jack
(mic/ant.) of the M-216
transmitter. The whip
antenna should be in a
vertical position away from
any metallic objects to insure
maximum range performance.
b. Connect the proper auxiliary input cable to the
audio source. Connect the right-angle mini plug end of the
auxiliary input cable in the “AUX” input jack of the M-216 transmitter.
Note: Check to insure that the audio source is a line level, earphone level,
or fixed AUX level output.
(continued)