Install guide

12
Lock+Key for 2.5 sec. then
Lock+Key for 2.5 sec.
Menu 4
2. Selecting the Specific Option
Once you select the Option Menu in Step 1 you must scroll through that menu for the specific option.
[Hold the Trunk+Key Buttons for 2.5 seconds]
You will hold the Trunk+Key Buttons for 2.5 seconds each time you want to move down 1 position in the
option menu. The parking lights will also flash and siren chirp once. Pause for a few seconds and the system
will chirp the siren and flash the parking lights corresponding to which option you have selected in the menu.
For example if you select Option 1-10, the siren will chirp 10 times and parking lights flash 10 times.
3. Setting the Option
After the system confirms the option number, you can set the desired option setting by tapping button(s):
[Lock] for a split (0.5) second for the default setting
[Unlock] for a split (0.5) second for optional setting 2
[Trunk] for a split (0.5) second for optional setting 3
[Trunk+Key] for 2.5 seconds for optional setting 4
Resetting to Factory Defaults
To reset the options in a menu, enter the menu. (Step 1) After the parking lights flash and/or siren chirps tap the
Key Button three times. The siren will chirp and parking lights flash three times. The options in that menu will
reset to the default settings.
II. Option Programming Using a 2-Way Remote
Programming the main controller option using a 2-Way remote is a timed process. Please read the instructions
carefully.
1. Selecting the Option Menu
To select a menu, use the following button combinations:
I+II for 2.5 sec. then I+II for
2.5 sec.
Menu 1
I+II for 2.5 sec. then I+IV for
2.5 sec.
Menu 2
I+IV for 2.5 sec. then I+II for
2.5 sec.
Menu 3
I+IV for 2.5 sec. then I+IV for
2.5 sec.
Menu 4
2. Selecting the Specific Option
Once you select the Option Menu in Step 1 you must scroll through that menu for the specific option.
[Tap button 4 for a split (0.5) second]
You will tap button 4 for a split second each time you want to move down 1 position in the option menu.
The parking lights will also flash and siren chirp once. Pause for a few seconds and the system will chirp the
siren and flash the parking lights corresponding to which option you have selected in the menu. For example
if you select Option 1-10, the siren will chirp 10 times and parking lights flash 10 times.
3. Setting the Option
After the system confirms the option number, you can set the desired option setting by tapping button(s):
[I] for a split (0.5) second for the default setting
[II] for a split (0.5) second for optional setting 2