Installation guide

vii
Installation and Maintenance Standard 3.0 March 1994
Figures
Figure 1-1 An overview of hardware installation (a three-slot sys-
tem) 1-2
Figure 1-2 Removing the cover 1-4
Figure 1-3 The RSM Breakout Assembly 1-6
Figure 1-4 Inserting the 68k Card 1-8
Figure 1-5 Assembling and inserting the primary DVP Card 1-10
Figure 1-6 Assembling and inserting the Disk/Power Supply Card
1-12
Figure 1-7 Installing the Connector Board 1-13
Figure 1-8 Mounting the external tape drive 1-15
Figure 1-9 The LA75 Plus Companion printer control panel 1-18
Figure 1-10 Configuring the HP ThinkJet printer 1-20
Figure 1-11 Enabling the HP ThinkJet printer 1-21
Figure 2-1 A typical Card Option label 2-3
Figure 3-1 The voice security options form 3-7
Figure 3-2 The Thru-Dial Definition form 3-9
Figure 3-3 The Add a Voice Menu Definition form 3-10
Figure 3-4 The Voice Menu Definition form (continued) 3-11
Figure 3-5 The Voice Menu Definition form (continued) 3-12
Figure 3-6 The Add DN Information form (basic systems) 3-13
Figure 3-7 The Add DN Information form (Hospitality systems)
3-15
Figure 5-1 Testing voltage and resistance on the Connector Board
5-5
Figure 5-2 Cleaning the tape head 5-17
Figure 8-1 Hospitality system cables 8-3
Figure 9-1 Networked system cables 9-2
Figure 12-1 Maxtor 7080S & 7080SR disk drive configuration 12-2
Figure 12-2 Maxtor 7080S-C disk drive configuration 12-2
Figure 12-3 Maxtor 7120S disk drive configuration 12-3
Figure 12-4 Maxtor LXT340SY disk drive configuration (option A)
12-3
Figure 12-5 Maxtor LXT340SY disk drive configuration (option B)
12-4
Figure 12-6 Quantum ProDrive 80S disk drive configuration 12-4
Figure 12-7 Seagate ST1096N disk drive configuration 12-5
Figure 12-8 Seagate ST1201N disk drive configuration 12-5
Figure 12-9 Seagate ST1480N disk drive configuration 12-6
Figure 12-10 Seagate ST3390N disk drive configuration 12-7