Installation Manual

INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 98
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Label Description
Trap Security
Engine ID
Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using
USM for authentication and privacy. A unique engine ID for these traps and informs
is needed. When “Trap Probe Security Engine ID” is enabled, the ID will be probed
automatically. Otherwise, the ID specified in this field is used. The string must contain
an even number between 10 and 64 hexadecimal digits, but all-zeros and all-’F’s are
not allowed.
Trap Security
Name
Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for
authentication and privacy. A unique security name is needed when traps and informs
are enabled.
SNMP-Communities
Configure SNMPv3 communities table on this page. The entry index key is Community.
Label Description
Delete Check to delete the entry. It will be deleted during the next save.
Community Indicates the community access string to permit access to SNMPv3 agent. The allowed
string length is 1 to 32, and the allowed content is the ASCII characters from 33 to 126.
Source IP Indicates the SNMP access source address.
Source Mask Indicates the SNMP access source address mask.