Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 131
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Firmware
Firmware> Load <ip_addr_string> <file_name>
SNMP
SNMP>
Trap Inform Retry Times [<retries>]
Trap Probe Security Engine ID [enable|disable]
Trap Security Engine ID [<engineid>]
Trap Security Name [<security_name>]
Engine ID [<engineid>]
Community Add <community> [<ip_addr>] [<ip_mask>]
Community Delete <index>
Community Lookup [<index>]
User Add <engineid> <user_name> [MD5|SHA] [<auth_password>] [DES]
[<priv_password>]
User Delete <index>
User Changekey <engineid> <user_name> <auth_password> [<priv_
password>]
User Lookup [<index>]
Group Add <security_model> <security_name> <group_name>
Group Delete <index>
Group Lookup [<index>]
View Add <view_name> [included|excluded] <oid_subtree>
View Delete <index>
View Lookup [<index>]
Access Add <group_name> <security_model> <security_level>[<read_
view_name>] [<write_view_name>]
Access Delete <index>
Access Lookup [<index>]