Installation Manual
Table Of Contents
- About This Guide
- Overview
- Hardware Overview
- Ethernet Cables
- WEB Management
- Configuration by Web Browser
- About Web-based Management
- Basic Setting
- System Information
- Admin & Password
- Auth Method
- IP Setting
- HTTPS
- SSH
- LLDP
- Backup/Restore Configuration
- Firmware Update
- DHCP Server
- Port Setting
- Port Trunk
- LACP
- Redundancy
- MSTP
- STP
- VLAN
- VLAN Setting Example
- SNMP
- Traffic Prioritization
- Multicast
- Security
- AAA
- RADIUS Overview
- Warning
- System Warning
- Monitor and Diag
- Port Statistic
- System Log Information
- Cable Diagnostics
- SFP Monitor
- Ping
- Syncronization-PTP
- PoE Configuration
- Status
- Factory Defaults
- System Reboot
- Configuration by Web Browser
- Command Line Interface Management
- Technical Specifications
INS_CWGE26FX2TX24MSPOE_REV– 5 Mar 2014 PAGE 105
INSTALLATION AND OPERATION MANUAL CWGE26FX2TX24MSPOE
TECH SUPPORT: 1.888.678.9427
Detailed Statistics
This page provides detailed traffic statistics for a specific switch port. Use the port select box to
select which switch port details to display.
The displayed counters are the totals for receive and transmit, the size counters for receive and
transmit, and the error counters for receive and transmit.
Detailed Statistics-Receive & Transmit Total
Label Description
Rx and Tx
Packets
The number of received and transmitted (good and bad) packets.
Rx and Tx Octets The number of received and transmitted (good and bad) bytes. Includes FCS, but
excludes framing bits.
Rx and Tx
Unicast
The number of received and transmitted (good and bad) unicast packets.
Rx and Tx
Multicast
The number of received and transmitted (good and bad) multicast packets.
Rx and Tx
Broadcast
The number of received and transmitted (good and bad) broadcast packets.
Rx and Tx Pause A count of the MAC Control frames received or transmitted on this port that have an
opcode indicating a PAUSE operation.
Rx Drops The number of frames dropped due to lack of receive buffers or egress congestion.
Rx CRC/
Alignment
The number of frames received with CRC or alignment errors.
Rx Undersize The number of short 1 frames received with valid CRC.
Rx Oversize The number of long 2 frames received with valid CRC.
Rx Fragments The number of short 1 frames received with invalid CRC.
Rx Jabber The number of long 2 frames received with invalid CRC.
Rx Filtered The number of received frames filtered by the forwarding process.
Tx Drops The number of frames dropped due to output buffer congestion.
Tx Late / Exc.
Coll.
The number of frames dropped due to excessive or late collisions.