Specifications

ComNav Explorer V1T and V1C Installation & Operation
Document PN 29010088 V1.1 - 24 -
Thermal Imaging Camera
Camera Movement
1. Moving the Joystick Up/Down moves the camera head in the tilt direction, Up/Down respectively;
2. Moving the Joystick Left/Right moves the camera head in the tilt direction, Left/Right respectively;
The joystick controller is geared so that the pan, tilt and zoom speed increases progressively away from
the central position. The closer the centre point, the slower the control, the further away, the faster the
control.
The camera will automatically calculate the degree of zoom and gear the control so that the pan
and tilt speed reduces.
Zoom Control
1. Zoom In – for 2X zoom, twist the joystick head clockwise. For 4X zoom, press on the Red button
when twisting the joystick head clockwise;
2. Zoom Out – Twist the joystick head counter clockwise for Wide Zoom.
Contrast Mode Selection
1. Press and hold the White button;
2. While the White button is pressed, move the joystick head in any of the four directions: Left for Man
Over Board M.O.B, right for Fog Mode, Up for Marina mode and down for night mode.
3. Release the button once selection is made. Joystick will defaults back to standard Tilt/Pan Joystick
functions.
Colour Palette Selection
1. Press and hold the Red button;
2. While the Red button is pressed, move the joystick head in any of the four directions: Left for Ironbow
right for Reverse Ironbow, Up for White Hot and down for Black Hot.
3. Release the button once selection is made. Joystick will defaults back to standard Tilt/Pan Joystick
functions.