Instructions / Assembly

Measure your fence from top to bottom to determine what height you require.
Our privacy fence screens are 3” shorter than your fence to fit perfectly, nice
and taut. Measure your width as well to find a standard size fit for your needs.
Measure
Installation is as easy as 1, 2, 3! (But don't try installing on a windy day)
1. Start at one of the ends of your fence and loop zip ties on the vertical edge
using through the corner grommets and fence
2. Work your way along the length of your fence horizontally until you reach
the other end of the fence and finish linking
3. Inspect for any loose areas and to check that zip ties are secure
Pro tip: Zip ties are included are all “x 50 ft.” sizes
Install
ColourTree Privacy Fence Screen Installation
Standard
170 GSM 100% non-
recycled high-density
polyethylene
4 each corner, 1 each
1 ft. vertically and 2 ft.
horizontally; brass
90% visibility blockage
95% UV blockage
Commercial UV
stabilization, resistant
to fading, tearing, stains,
molding, mildew
Heavy Duty
PLUS
220 GSM 100% non-
recycled high-density
polyethylene
4 each corner, 1 each
1 ft. vertically and 2 ft.
horizontally; extra
heavy-duty brass
95% visibility blockage
98% UV blockage
Commercial UV
stabilization, resistant
to fading, tearing, stains,
molding, mildew