Use and Care Manual

ManualsBrandsColeman ManualsGeneratorsVoyager Pro 750-Watt Battery Generator with Solar Capability

Product Details (All Models)

AC/UPS

USB

12V

DISPLAY

12W

100W

Product Details (All Models)

Intelligent LCD Screen (All Models)

A. Intelligent LCD screen: See details at right

B. USB power button and ports

C. AC/UPS power button and outlets

D. 12V power button and accessory socket

E. Extension port:

Extension Pack sold separately

F. Solar input

G. AC input port:

Use AC charging cord (included)

H. Input overload protection switch

I. AC charging cord

SOLAR INPUT

AC INPUT

RED

F H

Quick Start Guide

Connect to AC outlet,

solar panel, or both to

fully charge unit:

Turn on outputs

(USB, AC, and 12V ports)

and connect device(s):

A 3 second delay may occur before

power is delivered to your device.

For more detail, refer to “UPS” or “Power

Save Off ” Mode section in this manual.

USB

AC/UPS

12V

PRESS

ONCE

USE THIS MODE

FOR

CPAP

AND OTHER

LOW-DRAW

APPLIANCES

AC/UPS

USB 12V

DISPLAY

2.4 A

3.0 A

SECONDS

PRESS / HOLD

Turning on UPS/Power Save

Off mode:

SOLAR INPUT

RED

SOLAR INPUT

RED

The Battery Generator can be charged from grid power (AC) or solar energy (solar panels). When it is being charged and discharged (used to power your items) at the same time:

• If the input power (charging the Battery Generator) is greater than the output power (used to power your items), the intelligent LCD screen will show the “Time to Full”.

• If the input power (charging the Battery Generator) is less than the output power (used to power your items), the intelligent LCD screen will show the “Time to Empty”.

• The LCD screen stays on during charging but it can be turned off by pressing the DISPLAY button below the screen.

If your Battery Generator is fully discharged (0% available power), the intelligent LCD screen will be completely dark. This screen will illuminate as soon as the Battery Generator is connected to power, letting you know that the unit is charging, and will

continually display the growing power status as the Battery Generator charges.

EXT BATT

Getting Started: Charging your Battery Generator

IMPORTANT: The Battery Generator should be placed in a dry, well ventilated area with at least 6 inches of space on all sides for proper ventilation.

BEFORE YOU START: See “Safety Information” section for important precautions. Please conform to all safety precautions in the guide. Keep this guide in a safe place for future reference.

IMPORTANT - CHARGE BEFORE USE: Fully charge your Battery Generator before using it and/or storing it. While recharging from an AC outlet, your Battery Generator should be located near an

easily accessible outlet. The charger is designed to maintain the battery in a healthy state.

IMPORTANT - The Battery Generator must be connected to a grounded AC outlet (3 prong outlet) to ensure safety when charging the product and used in UPS mode.

B. Fuel Gauge Indicators

• Percentage of available battery power

• Battery graph fuel gauge

C. Power Output (Usage) Indicators

• Total output wattage

• Time remaining to empty at current output

D. Special Function Indicators

• POWER SAVE OFF (details on Page 5)

• +EXT BATT (details on Page 3-4)

E. Warning Indicators

• HI TEMP/LO TEMP

• OUTPUT OVERLOAD

• LOW BATTERY

A. Charging Input Indicators

• Time to fully charge (in hours)

• AC or solar charge detected

• Input wattage

88:88

HILO TEMP OUTPUT OVERLOAD LOW BATTERY

POWER SAVE OFF

+EXT BATT

TIME

TO FULL

888%

888888

WATTS WATTS

88:88

TIME

TO EMPTY

A B C

MANUALS

EN ESPAÑOL / ET FRANÇAIS

ColemanPowerStations.com

Battery Generator

750 / 1000 / 1500

User Guide

Summary of content (8 pages)

PAGE 1
MANUALS EN ESPAÑOL / ET FRANÇAIS ColemanPowerStations.com Product Details Models) Battery (All Generator 750 / 1000 / 1500 User Guide Product Details (All Models) A A USB B D 12W I EXT BATT 12V 12W 100W Intelligent LCD Screen (All Models) E F AC/UPS C SOLAR INPUT RED H E G A. Intelligent LCD screen: See details at right B. USB power button and ports C. AC/UPS power button and outlets D. 12V power button and accessory socket E. Extension port: Extension Pack sold separately F.
PAGE 2
Getting Started (cont’d) Charging your Battery Generator from an AC outlet Estimated Charge Time: ~2 hours to full (750/1000) / ~3 hours to full (1500) NOTE: The ~2 hour charge time may vary depending on your AC outlet power and the climate (Battery Generator may charge more slowly in very high or low temperatures). 1 2 Keep charged for immediate use You may keep the Battery Generator plugged into your AC outlet for maintenance charging.
PAGE 3
Additional Features Using your Battery Generator as a stand-alone portable power pack Each output type (USB, AC, DC) has a separate power button with an indicator light to show that it is on. When any port is on, the intelligent LCD screen will also turn on. You can turn off the intelligent LCD screen at any time by pressing the DISPLAY button below the screen.
PAGE 4
Additional Features (cont’d) Connecting And Charging Your Extension Pack (sold separately) The Extension Pack Power Cord that is included with your Extension Pack creates a two-way power connection, allowing the Extension Pack to supply backup battery power to the Battery Generator, and also allows the Battery Generator to recharge the Extension Pack. IMPORTANT: Please use ONLY the included Extension Pack Power Cord to connect your Battery Generator and Extension Pack.
PAGE 5
Additional Features (cont’d) Disconnecting Your Extension Pack 1 2 3 888% 888 WATTS USB Pull the release lever to unlock the Power Cord. Steady the Battery Generator with one hand so it does not move. With your other hand, use the Release Lever as a finger loop. 2.4 A The “+EXT BATT” icon will no longer show on the Battery Generator’s Intelligent LCD Screen. Repeat Steps 1 and 2 to disconnect the Extension Pack. Store the Power Cord in a clean and dry place. 2.
PAGE 6
Reference Household Items: Approximate Run Times Run Time Device Continuous draw (Watts) 750 1000 1500 LED string lights 3.
PAGE 7
Reference (cont’d) Troubleshooting Guide Your Battery Generator features several built-in protection features to ensure safe and efficient operation. Below is a guide which shows the typical faults that occur during normal operation and how to correct them and resume use. If a fault occurs, the following warning(s) will appear on the intelligent LCD screen. Please refer to the table below to safely correct any problems and allow your Battery Generator to reset and resume operation.
PAGE 8
Support And Warranty Contacting Customer Support If you experience any problems or have any questions regarding your product, free technical support is available. Call from a phone where you have access to your product.